Name: Charger Piles - reliable charging services | Yudian
SKU: 07

Charger Piles

Charger piles are the core equipment of new energy vehicle charging stations and an upgrade over traditional products. Featuring a single-unit multi-gun design, they support flexible power distribution and simultaneous charging for multiple vehicles. Compatible with slow and fast charging, they suit various vehicle brands and models. Integrated with intelligent scheduling, remote monitoring and accurate billing, they provide multiple safety protections including overvoltage, overcurrent and overtemperature to ensure stable and reliable charging.

.

connect with usconnect with us

The main unit of the charging pile features a wide power output range from 480 kW to 1680 kW, supporting intelligent dynamic power distribution according to the actual charging demand of connected vehicles.The system can be equipped with a flexible number of charging terminals, with each terminal providing a stable power output of 60 kW (power level can be customized to meet specific project requirements).It supports a configuration of 8 to 28 charging guns (the quantity can be customized based on application scenarios), enabling simultaneous and efficient charging for multiple electric vehicles with high stability, strong compatibility, and excellent adaptability to various working conditions.

Table 1-1 DCP-Q480 Host Performance Parameters

Project		Qualification
Product Model Specifications		DCP-Q480
Input characteristics	Input voltage	AC380V (1±15%) three-phase five-wire
	Accycle	50±1Hz
	Current harmonic distortion rate	THDi ≤ 5%
	Full load efficiency	≥ 96％
Input-output characteristic	Output rating	480kW
	Output current range	Single circuit: 0-250A (automatically allocated as needed)
	Current limiting regulation range	20% to 100% of the rated value
	Number of output channels	Supports up to 12 output channels
	Voltage regulation accuracy	≤ ±0.5﹪
	Steady flow accuracy	±1% (current range: 20%-100% load)
	Ripple factor	Effective value coefficient: ≤ 0.5%
Protection feature	Overvoltage protection input	When the input voltage exceeds the overvoltage protection threshold, the charger automatically activates protection.
	Input under-voltage protection	When the input voltage falls below the undervoltage protection threshold, the charger automatically activates protection.
	Overvoltage protection output	The charger automatically protects itself when the output voltage exceeds the overvoltage threshold.
	Output short circuit protection	When an output short circuit occurs, the charger can automatically protect itself. Upon fault point isolation, automatic restoration is achieved.
	Overheat protection	When the internal temperature of the charger exceeds the over-temperature threshold, it can automatically activate protection.
	Communication protection	Shut down due to communication failure in electric vehicles
	Ambient temperature	-25℃ - +55℃
	Cooling-down method	Air blast cooling
	Audible noise	≤65 dB
	Ievels of protection	IP54
	Outline dimension （mm）	480kW main unit: 1950 (height) × 1500 (width) × 1000 (depth)

Table 1-2 DCP-Q480 Terminal Performance Parameters

Project	Qualification
Product Model Specifications	DCP-Q480
Output voltage range	DC200-1000V
Output current range	Single circuit: 0-250A (automatically allocated as needed)
Current limiting regulation range	20% to 100% of the rated value
Number of output channels	Single or dual guns available
Voltage regulation accuracy	≤ ±0.5﹪
Steady flow accuracy	±1% (current range: 20%-100% load)
Ripple factor	Effective value coefficient: ≤ 0.5%
Overvoltage protection output	The charger automatically protects itself when the output voltage exceeds the overvoltage threshold.
Output short circuit protection	When an output short circuit occurs, the charger can automatically protect itself. Upon fault point isolation, automatic restoration is achieved.
Overheat protection	When the internal temperature of the charger exceeds the over-temperature threshold, it can automatically activate protection.
Communication protection	Shut down due to communication failure in electric vehicles
Ambient temperature	-25℃ - +55℃
Cooling-down method	Air blast cooling
Audible noise	≤65 dB
Ievels of protection	IP54
Outline dimension （mm）	Terminal dimensions: 2000 (height) * 700 (width) * 345 (depth)

Seamless Delivery Process for Your EV Charging Solutions

We’ve streamlined our end-to-end delivery workflow to ensure a smooth, reliable experience from contract to after-sales support. Our 6-step process keeps you informed and in control at every stage, so you can focus on building your charging infrastructure with confidence.