Description
The main unit of the charging pile features a wide power output range from 480 kW to 1680 kW, supporting intelligent dynamic power distribution according to the actual charging demand of connected vehicles.The system can be equipped with a flexible number of charging terminals, with each terminal providing a stable power output of 60 kW (power level can be customized to meet specific project requirements).It supports a configuration of 8 to 28 charging guns (the quantity can be customized based on application scenarios), enabling simultaneous and efficient charging for multiple electric vehicles with high stability, strong compatibility, and excellent adaptability to various working conditions.
Table 1-1 DCP-Q480 Host Performance Parameters
| Project | Qualification |
| Product Model Specifications | DCP-Q480 |
| Input characteristics | Input voltage | AC380V (1±15%) three-phase five-wire |
| Accycle | 50±1Hz |
| Current harmonic distortion rate | THDi ≤ 5% |
| Full load efficiency | ≥ 96％ |
| Input-output characteristic | Output rating | 480kW |
| Output current range | Single circuit: 0-250A (automatically allocated as needed) |
| Current limiting regulation range | 20% to 100% of the rated value |
| Number of output channels | Supports up to 12 output channels |
| Voltage regulation accuracy | ≤ ±0.5﹪ |
| Steady flow accuracy | ±1% (current range: 20%-100% load) |
| Ripple factor | Effective value coefficient: ≤ 0.5% |
| Protection feature | Overvoltage protection input | When the input voltage exceeds the overvoltage protection threshold, the charger automatically activates protection. |
| Input under-voltage protection | When the input voltage falls below the undervoltage protection threshold, the charger automatically activates protection. |
| Overvoltage protection output | The charger automatically protects itself when the output voltage exceeds the overvoltage threshold. |
| Output short circuit protection | When an output short circuit occurs, the charger can automatically protect itself. Upon fault point isolation, automatic restoration is achieved. |
| Overheat protection | When the internal temperature of the charger exceeds the over-temperature threshold, it can automatically activate protection. |
| Communication protection | Shut down due to communication failure in electric vehicles |
| Ambient temperature | -25℃ - +55℃ |
| Cooling-down method | Air blast cooling |
| Audible noise | ≤65 dB |
| Ievels of protection | IP54 |
| Outline dimension （mm） | 480kW main unit: 1950 (height) × 1500 (width) × 1000 (depth) |
Table 1-2 DCP-Q480 Terminal Performance Parameters
| Project | Qualification |
| Product Model Specifications | DCP-Q480 |
| Output voltage range | DC200-1000V |
| Output current range | Single circuit: 0-250A (automatically allocated as needed) |
| Current limiting regulation range | 20% to 100% of the rated value |
| Number of output channels | Single or dual guns available |
| Voltage regulation accuracy | ≤ ±0.5﹪ |
| Steady flow accuracy | ±1% (current range: 20%-100% load) |
| Ripple factor | Effective value coefficient: ≤ 0.5% |
| Overvoltage protection output | The charger automatically protects itself when the output voltage exceeds the overvoltage threshold. |
| Output short circuit protection | When an output short circuit occurs, the charger can automatically protect itself. Upon fault point isolation, automatic restoration is achieved. |
| Overheat protection | When the internal temperature of the charger exceeds the over-temperature threshold, it can automatically activate protection. |
| Communication protection | Shut down due to communication failure in electric vehicles |
| Ambient temperature | -25℃ - +55℃ |
| Cooling-down method | Air blast cooling |
| Audible noise | ≤65 dB |
| Ievels of protection | IP54 |
| Outline dimension （mm） | Terminal dimensions: 2000 (height) * 700 (width) * 345 (depth) |
FAQ
Q1: What types of EV charger piles do you offer?
A: We provide a comprehensive range of charging solutions divided into two main categories:
-
AC Chargers: Primarily for home or long-term parking (e.g., 7kW), focusing on compact design and ease of use.
-
DC Fast Chargers: Ranging from 20kW to 600kW, designed for commercial hubs, fleet depots, and highway service stations where rapid charging is essential.
Q2: How do I choose between an AC and a DC charger pile?
A: The choice depends on your “dwell time” (how long the car stays parked):
-
Choose AC if the vehicle stays for 6+ hours (residential, overnight parking).
-
Choose DC if you need to provide a significant charge in 15–60 minutes (retail centers, gas stations, logistics fleets).
Q3: Are your charger piles compatible with international EV standards?
A: Yes. Our products are engineered to serve global markets. Depending on the model, we support:
-
CCS1 & CCS2 (Europe, North America, Oceania)
-
GB/T (China and specific export markets)
-
CHAdeMO (Japan and legacy global fleets)
-
Type 1 & Type 2 for AC charging.
Q4: Can these charger piles be customized with my own branding?
A: Absolutely. We offer extensive OEM/ODM services. You can customize the exterior color, add your company logo to the housing, and even personalize the User Interface (UI) on the LCD touchscreen to align with your brand identity.
Q5: What smart management features are available?
A: Most of our charger piles are “Smart Chargers,” featuring:
-
OCPP Compliance: Compatible with OCPP 1.6J or 2.0.1 for integration with third-party billing and management platforms.
-
Connectivity: Integrated 4G, Wi-Fi, and Ethernet modules.
-
Remote Control: Operators can monitor status, update software (OTA), and troubleshoot issues remotely.
Q6: What are the installation requirements?
A: * AC Chargers (7kW): Usually require a standard single-phase 220V connection.
Q7: How do users pay for charging?
A: Our piles support multiple authorization and payment methods:
-
RFID Cards: Ideal for private fleets or member-only access.
-
QR Code / App: For public users to scan and pay via mobile wallets.
-
Plug & Charge: Based on ISO 15118 (on supported models).
-
POS Terminals: Optional integration for direct credit card payments.
Q8: Are the charger piles safe for outdoor use in extreme weather?
A: Yes. Our units are built with high-quality materials and rated at IP54 or IP55 for dust and water resistance. They include multiple safety layers such as surge protection, leakage protection, over-temperature protection, and emergency stop buttons, and can operate in temperatures ranging from -30°C to +55°C.
Q9: What kind of after-sales support do you provide?
A: We provide full technical documentation, installation guides, and remote technical support. For large-scale projects, we can offer specialized consulting to help optimize your charging network layout and power distribution.
Reviews
There are no reviews yet.